- Category: Guns
- Created: 03 February 2011
The Baserri Chronicles Part III: New shotgun companies are a rarity these days, and so when one comes along we’re eager to track its progress. That’s the idea behind our series, the Baserri Chronicles. In this third installment, we shoot the Baserri HR field shotgun.
- Category: Biographies and Stories
- Created: 05 October 2010
Our friend Silvio Calabi gave us a heads up that the book he co-wrote called “Hemingway’s Guns: The Sporting Arms of Ernest Hemingway” was about to be published. Having seen some of the chapters in advance, we were excited about the new information revealed from the in-depth research. Silvio gave us permission to run a chapter titled “The Winchester Model 21 Shotguns,” which appears following the introduction below.
Brilliant blue skies and rolling native grasslands as far as the eye could see created a gorgeous backdrop against the quiet farmlands of southern South Dakota. My home away from home was the beautiful rustic lodge of Granite Springs near Alexandra. Here I would join up with several women to participate in a National Rifle Association (NRA) Women On Target (WOT) upland hunt.
Hunters! Clay Target Shooters! All sportsmen who love shotguns! Now, for a limitedtime, Legacy Sports International is offering the Verona 401 semi-auto shotgun with a$100.00 rebate directly – and instantly –from Davidson’s Gallery of Guns. This means nomailing a rebate coupon to a manufacturer and waiting weeks to get your money back!
And there’s more! Each consumer ordering a Verona 401 during the Special period willbe entered into a drawing to win a waterfowl hunting trip in January 2010 with membersof Team Maniac from the Fowl Life television show.
Verona shotguns are being reintroduced to the shooting marketplace this year by LegacySports International. Many consumers and dealers alike will remember the Verona for it’sgreat line of Over/Unders brought in by PMC. Legacy Sports is not only bringing backthese guns, but they are significantly expanding the line.
In addition to the popular over/under lineup, Legacy Sports is also bringing in a family of Side by Sides, an Over/Under combo with a two barrel upland bird barrel set, and the 401line of inertia driven semi-automatics that have been field tested and endorsed by the castof the new television show, The Fowl Life. The Fowl Life airs on The SportsmanChannel, Pursuit Channel, ICTV and in Canada, Wild TV. Verona 401 semi-autos arefeatured on this show in all duck and goose hunting segments.
Shotgun Life, the first online magazine dedicated to the best in wing and clays shooting,also featured an in-depth story about the new Veronas. You can see the story at www.shotgunlife.com.
All Veronas are Italian-made and are premium quality shotguns. The new inertia driven401 semi-autos are a product of F.lli Pietta, well known for their quality reproductionguns of the Old West. The 501 and 702 Series of Over/Unders are again beingmanufactured by F.A.I.R. while the 662 Side by Side series and the two barrel O/Ucombo are made by Fausti. All are available through Davidson’s Gallery of Guns, or adealer near you.
Further information about these shotguns – and this offer – can be seen in SportingClassics magazine, On Target magazine and on www.shotgunlife.com as well as on www.thefowllife.com and www.legacysports.com.
For more details, contact Legacy Sports International at 775-828-0555 or e-mail email@example.com.
Written by Irwin Greenstein with the opinions of Stephen Biello, Debbie Clay, Barry Goff, Sr., Brad Landseadel, Elizabeth Lanier, Joe Notarfrancesco , Vero Ricci, Steve Toomey, Kent Witters, Carolinn Poucher Woody
Starting in March 2010, the Ithaca Gun Company will begin shipment of a waterfowl pump gun that’s infused with a weather and scratch resistant treatment believed to be the second application of this formula for a civilian shotgun – the first coming with Ithaca’s current Model 37 Defense pump gun.
- Category: Guns
- Created: 08 October 2009
There are no signs on the factory at 420 North Walpole Street in Upper Sandusky, Ohio, but open the old door and the pungent smell of machine oil is your first hint that the Ithaca shotgun is being re-born.
A proper fitting shotgun is so important that some folks are willing to spend $90,000 and more to get it. For that $90,000, you can take possession of a bespoke Purdey side-by-side custom fit to you much as the company did to the British landed gentry in the 19th century.
But for shooters who don’t have the money or the time to wait 12 long months for their shotguns, you can fit an off-the-shelf shotgun to your frame in ways that will enable you to hit plenty of targets -- consistently.
Ask the experts about purchasing a shotgun and the first thing they’ll advise is to make sure it fits. In this section you’ll find everything necessary to help you understand the dynamics of a well-fitting shotgun…
What to look for Eye domination Trigger pull Adjustable combs Adjustable butt plates Common mistakes Low gun fit
When it comes to shooting shotguns, if anything goofy is in your head, it will likely show up in the trigger.
Recoil aversion, doubt over the break point, longings for banana-nut pancakes and bacon drenched in warm maple syrup -- whatever distraction or bugaboo that causes you to miss a target can easily manifest as a fickle trigger finger.
Even then, assuming the target has your full concentration, the trigger is the place on the shotgun where you commit: if the trigger pull is too heavy, too light or too long the results are likely to be the same: a target that just keeps on going.
When it comes to trigger-pull weight, the ideal is between 3½ to 4 pounds for single- trigger shotguns. On a side-by-side shotgun that has two triggers, the front trigger should set at about 3½ pounds. The rear trigger can be slightly heavier due to the fact that it rests on a slightly stronger part of your finger.
Shotgun Triggers and Your Local Gunsmith
If you have any doubts about the weight of your trigger pull, you can purchase a trigger-pull gauge for anywhere between $20 and $70 -- or you can visit your local gunsmith. A trigger-pull gauge is standard-issue equipment for gunsmiths.
The next problem with your trigger could be the length of pull. If it’s slightly too long or too short, you could find yourself shooting prematurely or flinching because the trigger is simply too far back for you to exert the proper pressure.
The first thing to do is check to see if your trigger is adjustable. These adjustable shotgun triggers generally come in two flavors: notched and variable. The notched variety will let you move the trigger in preset increments. The variable has no preset increments -- providing a more accurate fit.
Is Your Shotgun Trigger Adjustable?
The give-away as to whether or not you have an adjustable trigger is a tiny Allen-screw in the trigger (or you could just read the manual). And if your gun did come with an adjustable trigger, the proper Allen wrench should have been packaged with your shotgun.
After adjusting the trigger, if the gun still doesn’t fit right, then its time to consider adjusting the length of the stock. You can either cut the stock or get any number of adjustable recoil pads.
One thing about shotgun triggers that may surprise you is how your efforts to combat recoil could impact your trigger performance.
Shooters with recoil problems try to address the predicament by either going with low-recoil shells or inserting tubes that allow you to shoot a smaller gauge with reduced recoil. Suddenly, you find that your trigger won’t reset on the second shot.
Here’s what happened…
Shotguns With Inertia Triggers
Most shotguns are manufactured with inertia triggers. That term is derived from a mechanism where the recoil from the first shot actually enables the trigger to get off the second shot. The prerequisite recoil set by the factory takes into account a standard off-the-shelf load that would be used for the original gauge of the shotgun.
When you manipulate the recoil, you’re also manipulating the inertia necessary to cycle the trigger for the second shot. So if you develop trigger malfunctions as you experiment with low-recoil and subgauge loads, it could be that you’re not generating enough pressure.
At that point, your recoil problems become more complicated. Do you buy a smaller gauge shotgun? Do you reload your own shells to custom-tailor your own load? Do you take the trigger to a gunsmith to see if they can adjust the trigger to a lighter load? Or do you replace the inertia trigger with a different type of trigger?
(Actually, there could be one more incredibly easy solution. Change the selector on your shotgun to reverse the order of which barrel shoots first. Most shooters want their bottom barrel to fire first. But if you select your top barrel to shoot first, it could conceivably solve the problem with inertia triggers.)
Mechanical or Release Triggers for Your Shotgun?
If you opt to replace the trigger entirely, that leaves you with two alternatives: mechanical triggers or release triggers.
With a mechanical trigger, both hammers are cocked when you break open the shotgun. By eliminating the inertia factor, the second barrel will fire when the first barrel fails to fire.
Then there are release triggers. They sound counter-intuitive, but shooters who use them can’t go back. Think of a release trigger as drawing back the string on a bow. To fire the arrow you simply release the string. It’s similar with a release trigger.
To set the trigger you pull on it as though to fire it. But the trigger won’t fire until you take your finger off it. Release triggers were originally designed for single-shot trap guns -- the idea behind it that you were less likely to flinch on targets that generally flew straight out.
Over time, release triggers migrated to skeet and sporting shotguns. And the technology has grown more sophisticated. You can now either order, or have customized, just about any configuration of a release trigger.
You can have release-pull, release-release, pull-release -- pretty much whatever your heart desires.
Look for the Big R on the Shotgun
Be advised: release triggers can be very dangerous in the wrong hands. In fact, any responsible shotgun owner with a release trigger will affix a sticker that sports a big R on a fluorescent background as a warning. It is highly advised not to let new shooters try release triggers, since instinctively they want to pull the trigger to fire the shotgun.
Whether or not you’re looking to solve a problem with your shooting, some shooters simply prefer different kinds of triggers to make them more successful.
Side-by-side owners really go for the original double trigger. This system predates screw-in chokes. Since early side-by-sides were mostly field guns, the barrels were choked to hit birds at different distances.
If you missed the first shot on an outgoing bird, then the assumption was that the second shot would be further away and you would need a tighter choke. For incoming birds, a wider choke ensured bagging the bird on the second shot.
To remedy the problem with fix-choked shotguns, the early side-by-sides (and the modern English variation) are fitted with two triggers in one tang. The front trigger fires the right barrel and rear trigger the left.
Shooting double-trigger shotguns is definitely an acquired skill -- especially if you’re a vintage shooter.
Most shooters are happy with the standard inertia trigger. If you want to experiment with your shotgun trigger, though, you’d be pleasantly surprise at the different options available to you.